We thought posting yet another teaser video would anger rather than amaze our patient and loyal customers. So in the spirit of Thanksgiving, we would like to show you all our sincere gratitude for your patience and support, by releasing a public beta early!

GW 2.0b1 enables up to date compatibility, barring only the 2 known NAND based titles (for which support is coming very soon), as well as the long awaited emuNAND feature. Complementing these great advancements is our new GUI menu system accessible by simply holding down the L button when tapping on the DS Profile button on the touchscreen. For this release we have tried to make the plethora of options as automated and intuitive as possible, and we welcome more feedback from our users regarding the menu, settings and other options for in the coming revisions.


So we left a few things out you say ? Well if it was so easy then others would have it already, or might falsely make videos of such claims .. anyway we digress ..
Both nand saving, which will officially make us 100% compatible with all known roms, and FAT32 (drag and drop) based multirom support are now close to completion and entering into our internal beta testing. As you can imagine, both these features required a major revamp of our hardware's internal firmware, something we had known and planned for from day one so rest assured, unlike others, GW3DS is a fully featured and FULLY updatable hardware design. Our policy has and will always be to stick by our customers and ensure they get value for their money. We will be calling on our beta testers shortly to help us stress test our next big step !

Release notes:

Booting into Gateway mode will now automatically check for the emuNAND partition and emulate the system NAND using this partition. We have also included an option to boot into Classic mode that enables genuine retail gamecards and the emuNAND functionality, allowing it to run like a regular 3DS on latest firmware.

If the emuNAND partition is not found, we fall back to the system NAND and boot into Gateway mode as in 1.x


WARNING NEVER ATTEMPT TO UPDATE YOUR SYSTEM NAND, MAKE SURE YOU ONLY UPDATE EMUNAND - PLEASE READ THE INSTRUCTIONS BELOW CAREFULLY !


We have gone to great lengths to ensure the stability and reliability of emuNAND, even though emuNAND is not currently required to allow full game compatibility. For those wishing to have the latest system firmware running concurrently with our device, please follow these instructions carefully:

Safety preparation: Please ensure you are either fully charged or plugged in to the charger before beginning. It is also advisable to turn off WiFi, and remove any stored WiFi access settings before proceeding.

1) Launch the Gateway menu and select the "BACKUP SYSTEM NAND" option. Follow on screen instructions to start the backup operation. This requires a minimum of 1GB free space on the Nintendo 3DS SD card, and will take approximately 10 minutes.  Every console has a unique NAND image and if you accidentally update the onboard system NAND then there is currently no known way to restore back to 4.5 through software means. The only recovery option is to restore via hardware using the backed up NAND image as a last resort. So please make sure you physically copy the file created by our tool from the SD card to your computers hard drive.

2) Make sure you have backed up any other files you may need from your Nintendo 3DS SD card or use a fresh new SD card to run the Format emuNAND step in the Gateway menu. Once this is done (approximately 5 minutes) and for as long as you use the specific SD card, GW will boot from the specially partitioned SD card and show the "GW3D" label in the system version number in the System Settings application.  

Once you have entered into the System Settings application and clearly seeing the "GW3D" version number, enter into WiFi settings and set up a connection.  

3) Update your emuNAND partition. Boot into Gateway mode, and enter into the System Settings application. CHECK to make sure you see the letters GW3D before the system version located in the bottom right hand corner of the top screen. If you only see a version number "Ver." please exit and perform step 2 again. With the "GW3D" X.XX.X version number verified proceed to update the console by going to Other Settings and scroll right to the last page and press the System Update button.

IMPORTANT !! .. ONLY ever update through System Settings and ONLY when you have double checked the "GW3D" lettering in front of the system version number !!

0.9.10

General/Core:
enh: break savestate back-compatibility
bug: improve save size autodetection for some games
bug: cpu: fix many basic jit cpu bugs
bug: 3d: tweak softrasterizer edge marking
bug: 3d: fix stale 4x4 texture palettes
bug: fix some GPU sprite blending scenarios
bug: fix bios HLE BitUnPack, UnCompHuffman
enh: modular slot-1 device system, emulate GC bus more faithfully
enh: support NAND slot-1 device
enh: auto-detect appropriate slot-1 and slot-2 device
enh: many revisions to firmware boot process for more authenticity. iQue and FlashME versions function, .dfc rewritten.
enh: support streaming NDS file from disk (like an ISO, to avoid long initial load time)
enh: run .dsv directly on disk, to save long flushing times. should speed backup operations.
enh: spu synch mode and method on commandline

Windows:
bug: fixes to advanscene DB import
bug: save opengl display method filter option
bug: general bugfixes to various screen layout modes
enh: add option to stop non-integer scaling during fullscreen or maximize
enh: improvements to save import dialog
enh: improved memory viewer tool
enh: operate better when run, against our advice, from a zipfile
enh: add slot-1 Nitro Filesystem viewer tool

Cocoa:
bug: fix slot1-R4 path saving
bug: fix bug with mic samples < 16khz bug: fix bugs and enhancements in multi display windows bug: fix handling of some joystick analog inputs enh: save display windows configuration and emulation speed on app exit